No-Wrap Ribs on the Rib Rack

Jump to recipe

Recipe Overview

Low and slow, no wrap, pure smoke. These ribs skip the foil crutch and rely on consistent heat, periodic mopping, and a final BBQ sauce glaze to deliver fall-off-the-bone tenderness with bark that actually stays intact. Using a rib rack maximizes your Kamado Joe's space, letting you smoke multiple racks at once without compromising airflow or smoke penetration.

Why the Rib Rack Changes Everything

  • Space efficiency: A Kamado Joe can fit 2 racks of ribs flat, maybe 3 if you stack using the Divide & Conquer® system. With our rib rack, you fit 4-5 full racks standing upright in the same footprint.
  • Better smoke exposure: When ribs lay flat, only the top gets direct smoke. The bottom sits against the grate, creating a barrier. Standing them vertically exposes both sides to smoke and heat equally. The result is even bark development and consistent color top to bottom.
  • Even cooking: Vertical positioning means every rib gets the same heat and airflow. No hot spots, no rotating racks halfway through, no worrying about the edges cooking faster than the center.
  • Drip management: Fat and moisture drip straight down instead of pooling on the ribs or grates. This keeps the bark crispy and prevents steaming.

The Kamado Joe's ceramic construction holds 275-300°F steady for 4+ hours, which is the perfect range for no-wrap ribs. Too low (225°F) and they take 6+ hours. Too high (325°F+) and the exterior dries before the interior tenderizes. 275-300°F is the sweet spot.

par Mitchell van Deelen

No-Wrap Ribs on the Rib Rack

Portions: 6 people
Temps de cuisson: 4 - 5 heures
Niveau:
Intermédiaire:
Méthode:
Fumé
Nourriture:
Bœuf
No-Wrap Ribs on the Rib Rack

Ingredients

  • Main

Instructions

    Prep the Ribs

  1. 01

    Remove the membrane from the back of the ribs for better seasoning penetration and tenderness. Apply a light layer of mustard as a binder (any mustard-based sauce works). Season the bone side first, then let sit for 10–15 minutes until the seasoning begins to “sweat.” Flip and season the meat side generously.

    2. Set Up the Kamado Joe

  2. 02

    Configure your Kamado Joe for indirect cooking at 275–300°F. Add your preferred smoking wood (apple, cherry, or hickory pair well with pork). Insert the Kamado Joe Rib Rack to hold ribs upright and maximize airflow.

    3. Start the Cook

  3. 03

    Place the ribs in the rib rack and close the dome. After 1½ hours, begin mopping lightly with apple juice to keep the surface moist and help build flavor. Continue mopping every 30 minutes until ribs are tender, approximately 4 hours total cook time.

    4. Sauce and Set

  4. 04

    When ribs are tender and the bark is well-developed, brush lightly with BBQ sauce. Return to the grill for 5–10 minutes to allow the sauce to set and become tacky.

    5. Rest and Serve

  5. 05

    Remove ribs from the grill and let rest briefly before slicing. Serve hot and watch them disappear.

@dutchie_cooks Side ribs on the kamado Joe with the rib rack! #ribs #bbq #teamred #kamadojoenation ♬ Lounge Soft Garden - Ausku Studio
Recettes Kamado Joe

Créer quelque chose d'imprévu

Voir toutes les recettes